If you’re a hockey player, you know the importance of having a secure grip on your hockey stick. Hockey stick tape is essential for players looking to increase their control and accuracy on the ice. This blog post will discuss how to properly apply hockey stick tape to get a perfect grip every time. We’ll also provide helpful tips for selecting the suitable hockey stick tape for your needs. So, let’s get started and learn how to get the most out of your hockey stick tape!
The basics of taping your hockey stick
Taping your hockey stick is essential to the game and vital in helping you get the perfect grip. It provides an extra layer of comfort and control when holding the stick and can make all the difference in your performance on the ice. Knowing how to tape your stick correctly is a skill that any hockey player should have. So, let’s start with the basics:
- Before taping your hockey stick, you’ll need to ensure that it is clean and free from dirt and debris. Use a damp cloth or paper towel to remove any dirt or buildup.
- Make sure you have the right tools. You’ll need a few things, such as hockey stick tape, scissors, and possibly an applicator (depending on the type of tape you’re using). Make sure to measure out enough tape for the job – you don’t want to run out halfway through!
- Now that you’re ready to begin taping, you can start with the stick’s blade. Start at one end of the blade and wrap the tape around it in an overlapping fashion until you reach the other end. Make sure that the tape is applied tightly and evenly. You can use your fingers or an applicator to ensure that it is snug against the blade.
Once the blade is fully taped, you can move on to taping the butt end of the stick. Wrap the tape around the end in a crisscross pattern to secure it firmly. Again, make sure that you wrap it tightly and evenly for the best results. Finally, it’s time to finish up. If everything feels secure and comfortable, your stick is ready to be used! Trim any excess tape off both ends of the stick and then test it out by holding it in your hands.
Preparing the stick
Before taping your hockey stick, it’s important to ensure that it is properly prepped. Start by thoroughly cleaning the stick with a cloth and a multi-surface cleaner. This will help remove dirt and oils from the surface and make sure the tape adheres properly.
Once your stick is clean, you can begin taping. Before you begin, you’ll need to cut the tape into the appropriate lengths. The stick’s blade should be covered with one long strip, while the butt end requires two shorter strips. Make sure to measure the correct length for each piece of tape.
When you’re ready, you can begin to tape. After you have cut your pieces of tape, place them on the stick where they will be used. Make sure they are positioned correctly and will not interfere with your grip on the stick.
Taping the blade
When taping the blade of your hockey stick, you’ll want to ensure a firm and secure grip. Start by unrolling a length of tape slightly longer than the blade itself. Secure the end of the tape to the blade and wrap it around the blade tightly in a spiral pattern, leaving about two inches of excess tape at the top. Once you reach the other end of the blade, trim off any excess tape and secure the end with a few more wraps of tape.
For extra grip, some players add friction tape to their sticks, a textured tape designed to provide a better hold on the stick. This type of tape is often found near the bottom of the stick and is especially helpful for those who tend to lose their grip when playing. Make sure to wrap the tape tightly in a spiral pattern, just like you did with the regular tape, and trim off any excess at the end.
Taping the butt end
The butt end of the stick is an important part that requires taping to ensure a secure grip. To tape the butt end, unwind the stick tape from the roll and cut it into sections of equal length. You should then wrap the first layer of tape around the butt end, overlapping each end of the tape. Keep the tape tight as you go, so there are no gaps between pieces.
Once the first layer of tape is in place, you can add a second layer. This time, the tape should be wrapped in the opposite direction to provide extra protection and ensure a secure grip. Make sure to overlap each piece of tape and keep the tension tight to prevent movement.
Finally, you can use a hockey stick wax to cover the exposed portion of the butt end. This will provide a smooth finish and help protect the tape from wear and tear. Once the wax has been applied, you can start using your hockey stick!
Finishing up
After taping the blade and butt end of your hockey stick, the last step is to finish up your taping job. Make sure to use scissors or a sharp utility knife to trim off any excess tape that has gone beyond the edges of the stick. This will give your stick a nice, clean look. If you’re using cloth tape, you can use a lighter to heat the edges of the tape to seal them and prevent fraying. When you’re done, give your stick a test swing to make sure it feels good in your hands.
Getting a perfect grip with Lizard Skins hockey stick tape is simple but requires patience and attention to detail. With practice, you’ll be able to quickly and confidently tape your sticks to perfection to stay on top of your game.
