Blog

Celie Hair: What Can I Use Instead Of Wig Glue?

Although wearing a lace-front wig eliminates the worry of slipping, the glue used in the wig may harm the edges or result in allergies.

What alternative to wig glue is there? You have more choices than you might realize! In this post, we’ll look at a variety of approaches. With which you may put the wig on. (HD Lace Wigs)

What do you use instead of wig glue?

You can use hair spray, hair adhesive, wig clips, headbands, or a few hairpins if you don’t have wig glue. In the following section, we’ll demonstrate how to utilize your choice hair glue option.

Holding Spray 

Many people who wear wigs opt to use hair spray rather than hair adhesive. Sap Spray offers a strong grip that will keep the object in place for a long time. The fact that it is simple to spritz on your hair is still an additional benefit. And is light enough to be layered. Safeguards your wig for up to a week.

How to use a wig with holding spray

You may spray your hair in a variety of ways. One of the most often used techniques is this.

Follow the step-by-step instructions

  • To eliminate oil and buildup from hair, dampen a cotton ball with alcohol and massage.
  • Put the wig on your head and shape it to match your hair.
  • Gently lift the lace and liberally mist the hairline with hairspray.
  • To remove any residual spray from your face, wipe it off with a cotton pad dipped in alcohol.
  • Makeover your wig. And you’re all set!

Hairstyle gel

Adding extra hair gel as an adhesive is a standard alternative method of attaching lace front wigs. You can use the wig for one or two days. And it’s simple to remove the glue.

Directions for using hair gel to apply wigs

  • Use a cotton ball and a tiny bit of alcohol to clean the skin around the edge.
  • Spray your hair with a little coating of gel and let it to air dry entirely. To hasten the procedure, use a dryer.
  • After the first application of gel has dried and become sticky, apply a second coat.
  • Follow step 3 once or twice more.
  • Permit the gel to finish drying.
  • Take the scarf off and arrange the wig.

Wig Clips

Wig clips, for those of you who are unfamiliar, are a particular style of headband that you wear beneath your wig. The gadget is held in place and kept from slipping by the handle, which is composed of a unique double-sided material. (Glueless Wigs)

Wig clips are ideal for people who want to extend or fasten their hair.

Information about how to use the wig holder

  • Wrap your head with the wig clip. And use the Velcro strip at the rear to fix the ends of your hair.
  • Pull the wig slowly over your head in step two. Move from front to back starting at the front.
  • Pull the wig back a little bit to finish.
  • Make sure the wig holder is entirely covered by the head frame.
  • To check that the wig is in place, tilt your head from side to side.
  • As always, style your wig!

Put an elastic band there.

The rear of the lace wig will have an extra elastic band sewn to it as part of the wig construction procedure. The shoe is raised to the head with the aid of a sturdy strap. Glue is not necessary with this technique. So, the edge is manageable. Just be careful not to wear your wig too tightly!

To fasten the rubber band, adhere to the procedures below.

  • Using a tape measure, determine the circumference of the head from the back to the ears.
  • Depending on how tight you want your wig to be, take off 1-2 inches.
  • Adjust the eraser’s length by cutting it.
  • Attach the elastic on the wig’s ears by sewing each end using a needle and thread. As you sew, make an effort to join them.
  • Try the wig on to make sure it fits. (Deep Wave Wig)

Conclusion

That’s all, then! A lace wig may be attached in a variety of ways without adhesive. If none of the approaches in this post work for you, try some alternative strategies. Hopefully one of them will. To determine the most effective approach.

Related Articles

Leave a Reply

Back to top button